You are visiting a website that is not intended for your region

The page or information you have requested is intended for an audience outside the United States. By continuing to browse you confirm that you are a non-US resident requesting access to this page or information.

Switch to the US site

Select Your Country or Region
Send
COVID-19 Resource Center

Rotaflow II System

The improved design of the Getinge Rotaflow II device, with new holder concept for extracorporeal life support (ECLS) in ICUThe improved design of the Getinge Rotaflow II device, with new holder concept for extracorporeal life support (ECLS) in ICU
The improved design of the Getinge Rotaflow II device for extracorporeal life support (ECLS) used in ICU-
The improved Getinge Rotaflow II compact holder concept for more flexibility, safety and ergonomics.
The improved design of the Getinge Rotaflow II device, with new holder concept for extracorporeal life support (ECLS) in ICU.

Rotaflow II System

Proven strength. Reinvented.

The Rotaflow II System is a reliable, high quality extracorporeal life support (ECLS) system that gives you the flexibility you need to provide quality patient care.

Experience the new Rotaflow II

With the completely new housing, an enhanced and simplified user interface, as well as many valuable features and improvements.

Overblik

The Getinge Rotaflow II extracorporeal life support (ECLS) system for veno-arterial (VA) and veno-venous (VV) ECMO in ICU.

The Rotaflow II System

As pioneers in the field of ECLS, Getinge is a leader in developing products and solutions in this area.

The Rotaflow II system drives, controls, and monitors extracorporeal support for these critically ill patients. It’s light and portable enough to be used for intra-hospital transport.

The Rotaflow II system can be used for both veno-arterial (VA) and veno-venous (VV) ECLS / ECMO. VA-ECMO supports both, the heart and lung in the case of cardiac and or respiratory failure, while VV-ECMO offers therapy to patients who have severe pulmonary insufficiency and cannot be supported using conventional ventilation strategies. Both ECMO approaches can serve as a bridge to recovery or further treatment.

Features

The Rotaflow II system is characterized by the following features:

  1. New design of the Rotaflow II System
  2. New holder concept
  3. Improved and simplified user interface
  4. Redesigned Rotaflow II Drive
  5. New battery management concept
  6. New features in connectivity

New Design of the Rotaflow II Base Unit

The Getinge Rotaflow II extracorporeal life support (ECLS) system for safe intra-hospital transport, easy to maneuver.

Modern plastic housing

Together with the Compact Holder, the Rotaflow II Drive and the primed PLS Set, the newly designed base unit weights approx. 11 kg, which is significantly less than the previous models.

On the Getinge Rotaflow II ECLS system are all elements that can or must be operated by the user highlighted in yellow.

Improved usability

All elements that can or must be operated by the user are highlighted in yellow. Users can immediately see where they have to touch to be able to carry out a command.

The Getinge Rotaflow II extracorporeal life support (ECLS) system allows flexible positioning close to the patient.

Simplified service and assembly concept

Minimal number of preventive maintenance parts (e. g. battery), this ensures a cost-effective product life cycle.

Compact and user-friendly holder concept

1. Fixation Point

The Fixation Point attaching the Compact Holder to a standard rail (vertical or horizontal) or a vertical round pole, such as on a mast.

2. Compact holder

The Compact Holder can be attached to the left or the right side of the Rotaflow II device handle or to the Fixation Point.

3. Reduced footprint

Compact Holder with Fixation Point, Rotaflow II Drive and the PLS module combines the components in one ergonomic holder concept.

4. Rotaflow II Design

Together with the Compact Holder, the Rotaflow II Drive and the primed PLS Set, the newly designed base unit weights approx. 11 kg, which is significantly less than the previous models

The Getinge Rotaflow II extracorporeal life support (ECLS) system for safe intra-hospital transport, easy to maneuver.

Intra-hospital transport

The Rotaflow II design is small, light, and flexibly integrates into the workplace. Safe intra-hospital transport.

With the Getinge Rotaflow II compact holder are all important components under control with just one hand.

Compact and safe

The new concept attaches the Rotaflow II Drive and the PLS-i oxygenator to a single Compact Holder.

With the Getinge Rotaflow II compact holder concept the essential parts can be securely fixed.

Flexible handling

The Fixation Point allows flexible positioning of the Compact Holder close to the patient.

Improved and simplified user interface

The user interface, with familiar elements, is easy-to-use and intuitive to operate. A simplified user interface is more user-friendly and can shorten the learning curve, for a safe use of the system.

Supporting features such as a step by step priming wizard guides (A) and assists during the setup of the device, the connection and priming of the PLS Set as well as a functional test, if required.

The advanced alarm management with supplementary information and guided assistance (B) supports you in better troubleshooting and patient management.

Getinge Rotaflow II interfaces to external devices with an alarm outlet connection, serial ports and Ethernet.

The redesigned Rotaflow II Drive

Hot-swap capable drive

  • The hot-plug capability of the new Rotaflow Drive ensures immediate exchange during operation
  • Color-coded parts help the user to immediately recognize where to operate the device. As well as a new plug connection, it also helps to avoid confusion with old drive versions
  • Use of external flow bubble and bubble sensors

New battery management concept

The Getinge Rotaflow II offers a more sustainable and consumption-controlled replacement of batteries.

Rotaflow II offers a more sustainable and consumption-controlled replacement of batteries by the customer. The concept enables the customer to calibrate and replace the systems batteries, without Getinge intervention.

The user interface provides a clear overview for monitoring the battery charge level and the health status of the battery.

Both calibration and battery replacement can be handled in-house by trained hospital employees, cost-effectively and predictably for significantly reduced downtime.

New features in connectivity

Interfaces to external devices

  • Electrical interface for transmission of alarms to an external system e. g. nurse call
  • Ethernet network connection and serial interface RS232 for transmission of application and device data to external systems

Downloads

Relaterede produkter

PLS System

Developed to support patients requiringrespiratory and/or circulatory support with blood flows from 0.5l/min to 7.0l/min.

Find ud af mere

Sprinter Cart XL

A workstation for extracorporeal support devices and applications in the operating room and intensive care unit, as well as for patient transport

Find ud af mere

Cardiohelp System

The small and lightweight heart-lung support system.

Find ud af mere