You are visiting a website that is not intended for your region

The page or information you have requested is intended for an audience outside the United States. By continuing to browse you confirm that you are a non-US resident requesting access to this page or information.

Switch to the US site

Getinge 88 Turbo


Getinge 88 Turbo

Getinge 88 Turbo ensures superior cleaning and disinfection of loads of up to 15 DIN trays. 


The Getinge 88 Turbo is unique in terms of its ability to clean, disinfect and dry in shorter periods of time. But it saves more than time – it also saves energy and water.

Maximum throughput

By eliminating added non-value time in the cycle and preheating of final rinse water, Getinge 88 Turbo achieves remarkably shorter cycle times compared to conventional washer-disinfectors.

Better throughput allows optimization of instrument utilization and a potentially increased number of operations. Naturally, the time gain is achieved without affecting the high quality of cleaning, disinfecting and drying. The benefits are obvious: higher throughput and fewer machines needed. And these benefits have a positive impact on your bottom line.

Higher throughput

Excellent loading capacity 15 DIN-trays

Ergonomic, safe loading

Technical data

Measurements - internal
Chamber volume (gross) L / Cu ft 470 / 16.6
Chamber volume (effective) L / Cu ft 340 / 12.0
Chamber width (effective) mm / in 650 / 25.59
Chamber depth (effective) mm / in 800 / 31.49
Chamber height (effective) mm / in 667 / 26.26
DIN 1/1* trays/load pcs 15
SPRI I** trays/load pcs 10
* = DIN 1/1 = 480x250x50mm  
**=SPRI I=450x340x70mm    
Measurements - external
Width mm / in 1270 / 50
Depth mm / in 990 / 38.9
Height mm / in 1870 / 73.6