Selecteer regio
Verzenden

HU 35 Heater Unit

Easy and safe temperature control for ECLS

The Heater Unit HU 35 is a precise and reliable oxygenator water supply device for maintaining normothermia during Extracorporeal Life Support (ECLS). The unit works ideally as a companion to Getinge’s Cardiohelp or Permanent Life Support (PLS) System.

Heater Unit HU 35, a precise and reliable oxygenator water supply device for maintaining normothermia during ECLS
Clear symbols and large figures on the heater unit HU 35 interface offer comfortable usability.
Self-closing quick couplings for convenient connection and disconnection of the water supply tubing without water spillage

Proven reliability and effectiveness

The water temperature of the HU 35 is controlled electronically, increased to the set point temperature, and the water in the circuit continually pumped via the connected oxygenator heat exchanger.

  • Easy to use
  • Easy to handle
  • No emission of aerosols

Related products

Comfortable usability

Clear symbols and large figures on the interface offer comfortable usability. The status display on the front panel of the HU 35 provides information on the proper functioning of the device during the use.

A safety system protects the patient by preventing temperatures beyond 40.1°C. Due to the absence of any fan, the device works exceptionally quiet.

Easy to handle

The HU 35 is smaller and lighter than other heater units in the European market, which are approved for use with oxygenator heat exchangers.

It can be simply placed on any stable table supporting its weight of 10 kg (with filled tank), wall mounted on standard slide rails, or perfectly positioned on the lower shelf of Getinge’s Sprinter Cart and Sprinter Cart XL workstations using a special holder system.

No emission of aerosols

The HU 35 water system is sealed to the environment. The filling port to the tank is hermetically closed.

Furthermore, the device is passively cooled without the support of a fan, so that no aerosols can escape during operation into the environment. 

ECLS with Cardiohelp

HU 35 and Cardiohelp System

The right combination for easy and safe temperature control for Getinge ECLS Systems equipped with Cardiohelp.

Heater Unit HU 35 Easy and safe temperature control for Extracorporeal Life Support

HU 35 and PLS System

Also for the PLS System endowed with Rotaflow or Rotaflow II, Heater Unit HU 35 complements Getinge’s ECLS System excellently.

Benefits at a glance

  • Smallest and lightest CE-approved heater unit for use with oxygenator heat exchangers during extracorporeal circulation
  • Robust stainless steel housing – easy to clean and damage-resistant
  • Easily transportable thanks to compact dimensions, low weight and practical handles
  • Perfect companion for the HLS System (Heart-Lung Support System) or Quadrox PLS System (Prolonged Life Support System) 
  • Strong heating capacity of 500 Watt ensuring reliable maintenance of patient temperatures
  • Clear symbols and large figures on the interface for simplified operation
  • Operational safety through automatic self-diagnostic test and temperature safety cut-off
  • Safe design with closed water tank and absence of any fan prevents aerosolization and allows pleasant quite operation
  • Self-closing quick couplings for convenient connection and disconnection of the water supply tubing without water spillage
  • Proven disinfection procedures including a protocol for highly effective disinfection and biofilm reduction – also effective against atypical mycobacteria in the water system for hygienic safety
  • Fits perfectly on Getinge’s workstations Sprinter Cart and Sprinter Cart XL