Välj region
Bekräfta

Rotaflow II System

Proven strength. Reinvented.

The Rotaflow II System is a reliable, high quality extracorporeal life support (ECLS) system that gives you the flexibility you need to provide quality patient care.

Extracorporeal life support (ECLS) with the reliable, high quality Rotaflow II
Rotaflow II user interface, with familiar elements, is easy-to-use and intuitive to operate.
The lightweight Rotaflow II Compact Holder attaches the Rotaflow II Drive and the PLS-i oxygenator

The Rotaflow II Centrifugal Pump System is at your side, with a low total cost of ownership.

The Rotaflow II System can be used for both veno-arterial (VA) and veno-venous (VV) ECLS / ECMO. VA-ECMO supports both, the heart and lung in the case of cardiac and or respiratory failure, while VV-ECMO offers therapy to patients who have severe pulmonary insufficiency and cannot be supported using conventional ventilation strategies. Both ECMO approaches can serve as a bridge to recovery or further treatment.

Rotaflow II not only comes in a completely new housing and with an enhanced and simplified user interface, but also offers many valuable features and improvements. 

Related products

Compact and user-friendly holder concept

Compact and user-friendly holder concept

1. Fixation Point

Fixation point attaching the Compact Holder to a standard rail (vertical or horizontal) or a vertical round pole, such as on a mast

2. Compact holder

The Compact Holder can be attached to the left or the right side of the Rotaflow II device handle or to the Fixation Point.

3. Reduced footprint

The new holder concept with its smaller footprint and ergonomic handling has an impact on safe and resource-efficient intra-hospital transport and flexible integration into the workplace

4. Rotaflow II Design

Compact Holder with Fixation Point, Rotaflow II Drive and the PLS module combines the components in one ergonomic holder concept.

Improved and simplified user interface

The user interface, with familiar elements, is easy-to-use and intuitive to operate. A simplified user interface is more user-friendly and can shorten the learning curve, for a safe use of the system.

 

The improved design of the Getinge Rotaflow II device for extracorporeal life support (ECLS) used in ICU-

Easy to use and intuitive to operate

The user interface, with familiar elements, is easy-to-use and intuitive to operate. A simplified user interface is more user-friendly and can shorten the learning curve, for a safe use of the system.

Rotaflow II screen

Priming wizard guides and assists

Supporting features such as a step by step priming wizard guides and assists during the setup of the device, the connection and priming of the PLS Set as well as a functional test, if required.

Rotaflow II screen

Advanced alarm management

The advanced alarm management with supplementary information and guided assistance supports you in better troubleshooting and patient management.

The hot-plug capability of the Rotaflow II Drive ensures immediate exchange during operation.

Hot-swap capable Rotaflow II Drive

  • The hot-plug capability of the new Rotaflow Drive ensures immediate exchange during operation
  • Color-coded parts help the user to immediately recognize where to operate the device. As well as a new plug connection, it also helps to avoid confusion with old drive versions
  • Use of external flow bubble and bubble sensors
Rotaflow-II battery pack

Battery management concept

Rotaflow II offers a more sustainable and consumption-controlled replacement of batteries by the customer. The concept enables the customer to calibrate and replace the systems batteries, without Getinge intervention.

The user interface provides a clear overview for monitoring the battery charge level and the health status of the battery.

Both calibration and battery replacement can be handled in-house by trained hospital employees, cost-effectively and predictably for significantly reduced downtime.

Getinge Rotaflow II interfaces to external devices with an alarm outlet connection, serial ports and Ethernet.

Interfaces to external devices

  • Electrical interface for transmission of alarms to an external system e. g. nurse call
  • Ethernet network connection and serial interface RS232 for transmission of application and device data to external systems

Rotaflow II - Enhanced ECMO value segment offering

 

New design

Lightweight, completely made of plastic; Reduced footprint and compact holder; All elements that can or must be operated by the user are highlighted in yellow

On the Getinge Rotaflow II ECLS system are all elements that can or must be operated by the user highlighted in yellow.

Improved usability

Compact and intuitive holder concept for safe and resource saving intra hospital transport as well as optimal integration into the workplace

The Getinge Rotaflow II extracorporeal life support (ECLS) system allows flexible positioning close to the patient.

Low total cost of ownership 

The Rotaflow II extracorporeal life support system provides all you need
at a low total cost of ownership Low total cost of ownership with high quality and safety at the same time.

The Getinge Rotaflow II extracorporeal life support (ECLS) system for safe intra-hospital transport, easy to maneuver.

Intra-hospital transport

Compact and intuitive holder concept for safe and resource saving intra hospital transport as well as optimal integration into the workplace

With the Getinge Rotaflow II compact holder are all important components under control with just one hand.

Compact and safe

The Rotaflow II design is small, light, and flexibly integrates into the workplace. It attaches the Rotaflow II Drive and the PLS-i oxygenator to a single Compact Holder.

With the Getinge Rotaflow II compact holder concept the essential parts can be securely fixed.

Flexible handling

The Fixation Point allows flexible positioning of the Compact Holder close to the patient. The connection for the compact holder on the device also serves as a handle for easy lifting or transportation.