Rotaflow II System
Rotaflow II System
Proven strength. Reinvented.
The Rotaflow II System is a reliable, high quality extracorporeal life support (ECLS) system that gives you the flexibility you need to provide quality patient care.
New Design of the Rotaflow II Base Unit
Modern plastic housing
Together with the Compact Holder, the Rotaflow II Drive and the primed PLS Set, the newly designed base unit weights approx. 11 kg, which is significantly less than the previous models.
All elements that can or must be operated by the user are highlighted in yellow. Users can immediately see where they have to touch to be able to carry out a command.
Simplified service and assembly concept
Minimal number of preventive maintenance parts (e. g. battery), this ensures a cost-effective product life cycle.
Compact and user-friendly holder concept
The Fixation Point attaching the Compact Holder to a standard rail (vertical or horizontal) or a vertical round pole, such as on a mast.
The Compact Holder can be attached to the left or the right side of the Rotaflow II device handle or to the Fixation Point.
Compact Holder with Fixation Point, Rotaflow II Drive and the PLS module combines the components in one ergonomic holder concept.
Together with the Compact Holder, the Rotaflow II Drive and the primed PLS Set, the newly designed base unit weights approx. 11 kg, which is significantly less than the previous models
The Rotaflow II design is small, light, and flexibly integrates into the workplace. Safe intra-hospital transport.
Compact and safe
The new concept attaches the Rotaflow II Drive and the PLS-i oxygenator to a single Compact Holder.
The Fixation Point allows flexible positioning of the Compact Holder close to the patient.
Improved and simplified user interface
The user interface, with familiar elements, is easy-to-use and intuitive to operate. A simplified user interface is more user-friendly and can shorten the learning curve, for a safe use of the system.
Supporting features such as a step by step priming wizard guides (A) and assists during the setup of the device, the connection and priming of the PLS Set as well as a functional test, if required.
The advanced alarm management with supplementary information and guided assistance (B) supports you in better troubleshooting and patient management.
The redesigned Rotaflow II Drive
Hot-swap capable drive
- The hot-plug capability of the new Rotaflow Drive ensures immediate exchange during operation
- Color-coded parts help the user to immediately recognize where to operate the device. As well as a new plug connection, it also helps to avoid confusion with old drive versions
- Use of external flow bubble and bubble sensors
New battery management concept
Rotaflow II offers a more sustainable and consumption-controlled replacement of batteries by the customer. The concept enables the customer to calibrate and replace the systems batteries, without Getinge intervention.
The user interface provides a clear overview for monitoring the battery charge level and the health status of the battery.
Both calibration and battery replacement can be handled in-house by trained hospital employees, cost-effectively and predictably for significantly reduced downtime.
New features in connectivity
Interfaces to external devices
- Electrical interface for transmission of alarms to an external system e. g. nurse call
- Ethernet network connection and serial interface RS232 for transmission of application and device data to external systems
Developed to support patients requiringrespiratory and/or circulatory support with blood flows from 0.5l/min to 7.0l/min.
SPRINTER CART XL
A workstation for extracorporeal support devices and applications in the operating room and intensive care unit, as well as for patient transport
The small and lightweight heart-lung support system.