You are visiting a website that is not intended for your region

The page or information you have requested is intended for an audience outside the United States. By continuing to browse you confirm that you are a non-US resident requesting access to this page or information.

Switch to the US site

Wash Monitors

getinge-assured-wash-monitor-400x267px-width460.jpg
getinge-test-soil-400x320px-width460.jpg
wash-monitor-ultrasonic-400px-width460.jpg
protein-test-lumen-1-width460.jpg

Wash Monitors

Used routinely, our Getinge Assured Wash Monitors provide independent verification that the cleaning process – whether in a washer-disinfector and/or additionally in an ultrasonic bath – is consistently providing the desired cleaning result.

The indicator is placed strategically in the device and provides an indication whether the process was sufficiently run or not. By verifying the critical process parameters, added assurance is provided that the equipment is cleaning as expected. Thus you minimize the risk of potential errors in the process and lower the risk of spreading infections in the healthcare environment. This means improved patient safety and reduced cost for the healthcare facility itself.

Overview

Wash monitors/indicators are used both to verify the result of the pre-cleaning – for instance using an ultrasonic cleaner indicator, but also to assure the main cleaning and disinfection process performed in a washer-disinfector was satisfactory.

A Protein test could preferably be used at the inspection of instruments to further detect protein residues on single cleaned and disinfected instruments – which would not be visible to the naked eye, for instance inside lumen instruments and endoscopes. With an instant protein reaction, these tests are quick and easy to use and can detect residual protein down to 1 microgram in less than 10 seconds. Synthetic Test soil can be used in order to simulate a ”real situation” when undergoing a validation or type testing a washer-disinfector or ultrasonic product.

Wash Monitoring Products

Wash monitors

Wash Monitor

For use in washer-disinfectors.

Overview

Monitoring all phases of the wash process

Our wash monitoring indicators perform routine process performance tests in washer-disinfectors. They monitor all phases of the wash process, including proper spray arm operation, water impingement, proper detergent selection and levels, water temperature and washer loading. Monitoring each shelf of each washer-disinfector enables you to ensure that all facets of the machine are operating properly and that efficient cleaning is achieved. The indicator is inserted into a reusable Wash Monitor Holder and placed face up in a tray.

The indicator is designed to meet the requirements of EN ISO15883.

* Not available for sales in the USA.

Features

  • For use in washer-disinfectors
  • For use with the re-usable Getinge Assured Wash Monitor Holder that mimics an instrument
  • Test-soil is designed to parallel the removal of blood and tissue from surgical instruments
  • No harmful components with non-toxic, synthetic soil (no actual blood components from any source are contained in the test-soil)
  • Red = the cleaning process is insufficient, Clear = the cleaning process is sufficient
  • Recordable

Technical data

   Order No
 Wash Monitor 25 pcs   503864500
 Wash Monitor 50 pcs  503864600
 Wash Monitor 100 pcs  503864700
 Wash Monitor holder 6 pcs 503864800 

Wash Monitor U/L · Ultrasonic/Lumen Test

For use in ultrasonic cleaners / irrigators.

Overview

Providing assurance and a traceable record

The Getinge Assured Ultrasonic Wash Monitor U/L checks the cleaning efficiency of lumen instruments in the ultrasonic cleaner. The test is inserted in a re-usable Wash Monitor F Holder to simulate flexible lumen instrument and into the Wash Monitor R Holder to simulate rigid lumen instruments. It is then placed in the ultrasonic cleaner.

Consistent with ISO 15883, routine monitoring of washer-disinfectors.

* Not available for sales in the USA.

Features

  • For use in ultrasonic cleaners / irrigators
  • For use with the re-usable Getinge Assured Wash Monitor F & R holders
  • Test-soil is designed to parallel the removal of blood and tissue from surgical instruments
  • No harmful components with non-toxic, synthetic soil (no actual blood components from any source are contained in the test-soil)
  • Blue = the cleaning process is insufficient, Clear = the cleaning process is sufficient
  • Recordable

Media Gallery

Technical data

  Order No
Wash Monitor U/L 25 pcs 503865300
Wash Monitor Holder Flexible (F) 1 pcs 503865100
Wash Monitor Holder Rigid (R) 1 pcs 503865000

Wash Monitor U · Ultrasonic Test

For use in ultrasonic cleaners.

Overview

Providing assurance and a traceable record

The Getinge Assured Ultrasonic Wash Monitor checks the cleaning efficiency in the ultrasonic cleaner. The test is inserted in a re-usable Wash Monitor Holder and then placed in the ultrasonic cleaner.

Consistent with ISO 15883, routine monitoring of washer-disinfectors.

* Not available for sales in the USA.

Features

  • For use in ultrasonic cleaners
  • For use with the re-usable Getinge Assured Wash Monitor Holder
  • Test-soil is designed to parallel the removal of blood and tissue from surgical instruments
  • No harmful components with non-toxic, synthetic soil (no actual blood components from any source are contained in the test-soil)
  • Blue = the cleaning process is insufficient, Clear = the cleaning process is sufficient
  • Recordable

Technical data

  Order No
Ultrasonic Wash Monitor U 50 pcs 503865300
Wash Monitor holder 6 pcs 503864800

Test soil

Test Soil

Synthetic test soil formulated with protein, lipids and polysaccharides to mimic surgical soil.

Overview

Synthetic Test soil simulating a “real situation”

Used as a process challenge in the commissioning of washer-disinfectors, Getinge Assured Test Soil is applied to instruments and allowed to dry. After drying, the instruments are washed accordingly and then inspected for cleanliness. If no test soil is visible after the wash process, the process is proven to be efficient.

All Getinge tests are designed in accordance with EN ISO 15883.

* Not available for sales in the USA.

Features

  • Synthetic test soil formulated with protein, lipids and polysaccharides to mimic surgical soil
  • Used as process challenge in the commissioning of washer-disinfectors
  • Shipped in powder form and then activated at the point of use with water
  • To be applied on instrument surfaces, lumens and equipment
  • If test soil is not visible after the wash process, the process is proven to be efficient

Protein tests

Protein Test Instrument Surface

The higher level of contamination of protein the darker and faster the blue result.

Overview

Cost effective and easy to use

The Getinge Assured Protein Test Instrument Surface is a quick and easy test used to detect residual protein on surfaces and surgical instruments. This test provides a semiquantitative measure of surface cleanliness; the higher the level of contamination of protein (bioburden), the darker and faster the color changes to blue.

Consistent with ISO 15883, routine monitoring of washer-disinfectors.

* Not available for sales in the USA.

Features

  • The higher level of contamination of protein the darker and faster the blue result
  • Protein residue test for surface instruments
  • Accuracy of 1 µg in less than 10 seconds
  • No incubation required
  • Clear light brown to blue color change
  • Cost effective and easy to use

Technical data

  Order No
Protein Test Instrument Surface, 25 swabs and tests per box 503878500

Protein Test Instrument Lumen

The higher level of contamination of protein the darker and faster the blue result.

Overview

Cost effective and easy to use

The Getinge Assured Protein Test Lumen is a quick and easy test used to detect residual protein in lumen surgical instruments. This test provides a semiquantitative measure of lumen cleanliness; the higher the level of contamination of protein (bioburden), the darker and faster the color changes to blue.

Consistent with ISO 15883, routine monitoring of washer-disinfectors.

* Not available for sales in the USA.

Features

  • The higher level of contamination of protein the darker and faster the blue result
  • Protein residue test for lumen surgical instruments
  • Accuracy of 1 µg in less than 10 seconds

  • No incubation required
  • Clear light brown to blue color change
  • Cost effective and easy to use

Technical data

  Order No
Protein Test Instrument Lumen, 25 swabs and tests per box 503911200

Protein Test Flexible Endoscope 2.5m

The higher level of contamination of protein the darker and faster the blue result.

Overview

Cost effective and easy to use

The Getinge Assured Protein Test Flexible Endoscope 2.5m is a quick and easy test used to detect residual protein in flexible endoscopes up to 2.5 meters long. This test provides a semiquantitative measure of surface cleanliness; the higher the level of contamination of protein (bioburden), the darker and faster the color changes to blue.

Consistent with ISO 15883, routine monitoring of washer-disinfectors.

* Not available for sales in the USA.

Features

  • The higher level of contamination of protein the darker and faster the blue result
  • Protein residue test for flexible endoscopes
  • Accuracy of 1 µg in less than 10 seconds

  • No incubation required
  • Clear light brown to blue color change
  • Cost effective and easy to use

Technical data

  Order No
Protein Test Flexible Endoscope, 10 swabs and tests per box 503964400

Downloads